ENGINE MOUNTS & BORE KITS
Due to the scarcity of VROD part manufacturers, there may be extended waits, or parts we can no longer supply.
We apologize for any inconvenience.
Polyurethane Mount Kit

- High performance Engine Mounts
$425.00
1320cc Big Bore Kit

- Available in 12.0 to 1 or 14.0 to 1 compression ratios
- Includes Vreeland’s Racing specification Cylinders, C.P. Pistons, Gaskets and O-rings.
- Crankcase boring required and available at an extra charge.
$1299.95
1434cc Big Bore Stroker Kit

- Available in 12.0 to 1 and 14.5 to 1 compression ratios
- Includes Vreeland’s Racing specifications Cylinders ,C.P. Pistons ,Gaskets, O-rings And a Weld-up stroker Crankshaft.
- Crankcase boring and clearancing required and available at an extra charge.
- Stock crankshaft core also required and must be received before kit can ship.
$2199.95
TOP END
Ray's Special nitrated beehive valve spring for standard V-Rod heads.
- Fit stock and Ferrea 3 grove valves.
- Set of 8
Springs $196.00 / Upper Collars $105.00 / 3 Grove Keepers $80.00
Ray’s Special Nitrated Beehive Destroyer Valve Springs

$196.00
Ray’s Special Valve Guides
$96.00
V-Rod chrome-moly high tensile cam cap bolts

$110.00
10mm Head Stud Kit

$220.00
12mm Head Stud Kit

$195.00
COMETIC Head Gaskets

- 4.134 Bore – .027″
- 4.134 Bore – .030″
- 4.134 Bore – .045″
- 4.250 Bore – .027″
- 4.250 Bore – .045″
- 4.285 Bore – .045″
- 4.315 Bore – .045″
$95.22 each
Bottom End
Ray’s Special Main Bearings

- SS Coated Blue, Red, Green
- Full set
$61.50
Ray’s Special Rod Bearings

- SS Coated & Chamfered
- Full set
$55.50
175HP 4.134 Bore – 3.085 Stroke C.P. Piston Kit .25 Inch

$539.95
200+HP – 4.250 Bore – 3.335 Stroke – C.P. Piston Kit .50 Inch

$539.95
3.937” bore , 9.95 to 1 compression ratio pistons.

- 1130cc
- For use with turbo or supercharged engines.
$579.95
4.134” bore, 9.95 to 1 compression ratio pistons.

- 1250cc
- For use with turbo or supercharged engines.
$579.95
Vreeland’s Specifications Big Bore Cyl. Sleeves

- 4.250 Bore
- 4.285 Bore
- 4.315 Bore
$359.95 Each
Destroyer Pistons and Sleeves

- Available in 4.134 bore & 4.164 bore.
$539.95 for the pistons / $339.95 for the sleeves.
Vreeland’s Specifications Dyer Rods

- Standard 5.708 Length
- Stroker 5.588 Length For .25″ & .50″ Strokers
$625.00 Each
Marine Crankshaft Billet Stroker Crank

- 3.335 “1/2 inch” stroke
- 3.210 “3/8 inch” stroke
- 3.085 “1/4 inch stroke
$2395.00
10mm Main Stud Kit
![]()
$92.50
INTAKE
64mm V-Rod Race Throttle Body

- Works best on 1430cc and larger stroker engines
- $125.05 core charge
- VREELAND'S EXCLUSIVE
No Longer Available
Throttle Stop

- For bracket & index racing
$24.95
58mm Shorts Velocity Stacks

- For Destroyer Throttle Body
$160.00
COOLING
Water Pump Kit

- Electric
- Vreeland's Exclusive
No Longer Available
Temp Sensor Override Switch

- This is a 3 position switch that in one position allows the bikes ECU to read the temp sensor normally. In another position the ECU is sent a signal that tells it that the engine temp is 189F which is high enough to defeat the low temp rev. limit, but not high enough to turn on the cooling fans.The third position will send a signal to the ECU that the engine temp is 223F which is high enough to turn on the cooling fans.
- Position 1 is for normal riding.
- Position 2 is for racing. it defeats the low temp rev. limit even if the engine temp is not hot enough yet.
- Position 3 is for the return road to cool the engine back down after your pass.
$90.00 each
PRIMARY & SECONDARY DRIVE
1.8 Straight Cut Second Gear Set

$450.00
Heavy Duty Destroyer Clutch Hat Bolts and Stainless A.R.P. Destroyer Rear Sprocket Bolt

$12.95 / $44.95
Chain Drive Kit

No Longer Available (Rear Sprockets Still Available)
Bullet Proof Billet Clutch Hub

$549.95
Polyurethane Cushion Drive Insulator

- Fits all belt drive V-Rods
$27.95
REAR TIRE
Goodyear Eagle Rear Tire

Out Of Stock
BILLET HEAVY DUTY DESTROYER FRONT WHEEL SPIDER
Bolt on replacement for the inferior stock spider

Out Of Stock